Table of Contents
Advertisement
FAULT DETECTION
Type
Condition Code or
Warning
Controllable
Critical
A critical fault will prevent normal operation and result in the system entering a failed state.
The control will:
• send "not available" data in the throttle and gear messages
• deactivate NEUTRAL Throttle Warm-Up mode
• send the fault message and/or alarm
• store the fault in memory
• flash the appropriate control head LED(s) five times per second
• When the control detects that the outboard is in NEUTRAL idle and the working lever is in
NEUTRAL, the system returns to normal operation.
16
Description
A conditional fault
requiring remedial
action to correct
that does not affect
normal operation.
Example: Attempt
to start outboard(s)
with control lever(s)
not in NEUTRAL.
Faults that allows
for a fully controlla-
ble remedial action.
Example: Low bat-
tery voltage.
Faults that result in
the inability to accu-
rately determine
critical outboard
commands.
Example: Commu-
nication between
the control and out-
board(s) EMM(s) is
lost.
Response
Response based on
condition - upon
resolution the sys-
tem will resume full
performance.
Informational only.
Commanded lever
and gear positions
become unavail-
able. Outboards set
to SAFE mode.
Indication
Condition specific
warning message
shows on gauge or
display.
NEUTRAL LED
flashes five times
per second.
Warning message
shows on gauge or
display.
Advertisement
Table of Contents
