Table of Contents
Advertisement
LED BRIGHTNESS AND SYSTEM DISPLAY
BACKLIGHTING
This feature requires the use of the NEUTRAL/RPM switch.
Use the
N
1) Turn the system ON and shift to NEUTRAL.
2) Press the (+) or (-) side of the button to increase or decrease the brightness of the
NEUTRAL LED and system displays in 10% increments.
3) Press the (+) side of the button one time after the maximum brightness is reached to
reach the lowest intensity.
4) Press the (-) side of the button one time after the minimum brightness is reached to
reach the highest intensity.
Each time the LED and system display brightness is changed, it is stored in the control and
reloaded the next time the system is turned ON.
12
to adjust LED brightness and system display backlighting.
Advertisement
Table of Contents
