Steps For Installation; Remove Packaging Materials; Prepare The Opening - Hisense HBG3601CPS Instructions For Installation Manual

Steps for installation

Remove packaging materials

Failure to remove packaging materials could result in damage to the appliance. Remove all packing
parts from the oven, racks, heating elements and drawer. Also remove protective film and labels on
the door, cooktop and control panel.

Prepare the opening

(for indoor use only)
EN 6
See ilustrations for all rough-in and spacing
dimensions. The appliance may be placed with
0'' clearance (flush) at the back walls and side
walls of the cabinets.
A. Recommended acceptable electrical and
gas outlet area. Orient the electrical
receptacle so the length is parallel to the
floor.