Operation
The dimmer switch without neutral controls the load that is connected to its cut phase terminal (
or - keys, or following a command received from a Leader product with which it was associated during the learning
scenario
.
(2)
It is then the Actor of a scenario and can take part in a maximum of 32 scenarios.
It can be controlled by an In One by Legrand general control from a radio product or a PLC product via the PLC/RF inter-
face Cat. No. 036 06.
The commands are the following :
- switch on by a short press on the ON key
- switch off by a short press on the OFF key
- dimming by the keys :
+ (factory set to 66%)
- (factory set to 33%)
with a short press.
- increasing by a long press on the ON keys or +
- decreasing by a long press on the OFF keys or -
Learning : action of associating products to be controlled simultaneously from a central point.
(1)
This association is performed by applying the scenario learning procedure on page 6.
Scenario : the set of products (actors) that are associated with a control key..
(2)
4
$
) using the ON, OFF, +
of a
(1)