Code 11 - Waveshare Barcode Scanner Module B Setup Manual

CODE 11

All Default Code 11 Settings
ON/OFF
*Off
On
PARITY BIT
This option sets 1 or 2 check bits of the Code 11 barcode. The default is two parity bits.
Two Parity Bits
One Parity Bit
BARCODE READING LENGTH
Scan the following barcode to change the reading length. For additional information, please refer
to the code length description. The minimum and maximum length is 1-80. The minimum default
value = 4 and the maximum default value = 80. (Note: After scanning the "Minimum Barcode
Length" and "Maximum Barcode Length", you also need to scan the specified barcode length and
save the barcode, please refer to the description of reading length.)
Maximum Barcode Length
Minimum Barcode Length
37 / 69