Cascade; Barcode Reading Length - Waveshare Barcode Scanner Module B Setup Manual

CASCADE

Codabar supports bar code cascade. When cascading is enabled, the device looks for a Codabar
barcode with a "d" start character, which is adjacent to a barcode with a "d" stop character. In this
A 1 2 3 4 D D 5 6 7 8A
case, two barcodes are connected into one, and all "D" characters are omitted.
Scan the "need" barcode to prevent the device from decoding a single "D" Codabar barcode without the
adjacent "D" start character. This option has no effect on Codabar without the stop/start D characters.
Required
On
* Off
BARCODE READING LENGTH
Scan the following barcode to change the reading length. For additional information, please refer
to the code length description. The minimum and maximum length is 2-60. Minimum default value
=4, and maximum default value =60. (Note: After scanning "Minimum Barcode Length" and
"Maximum Barcode Length", you need to scan the specified barcode length and save the barcode.
Please refer to the description of barcode length).
Maximum Barcode Length
Minimum Barcode Length
27 / 69