Successful Decoding Tone Duration Setting; Setting Beep Frequency For Decoding Failure; Read Delay - Waveshare Barcode Scanner Module B Setup Manual

SUCCESSFUL DECODING TONE DURATION SETTING

Scan the following barcode to modify the tone duration of the device after successful decoding.
The default is normal.
*Normal Beep Short Beep

SETTING BEEP FREQUENCY FOR DECODING FAILURE

Scan the following barcode to modify the frequency of the device beeping after decoding failure.
The default is Razz.
*Razz (250Hz) Medium (3250Hz)
High (4200Hz)

READ DELAY

Scan the following barcodes to set the time interval between the device reading one barcode and
then reading the next barcode. Default = 750ms.
No Delay
*Short Delay (750ms)
Medium Delay (1000ms)
Long Delay (1500ms)
17 / 69