Parts And Components; Before Use; Operation - cecotec Cook Control 10200 EcoPower Inox Instruction Manual

1. PARTS AND COMPONENTS

Img. 1.
1. Power knob
2. Tare function button
3. Display

2. BEFORE USE

Take the device out of its package and remove all packaging materials.
Check carefully if there is any damage, and if there is, immediately notify the Technical Support
Service of Cecotec.

3. OPERATION

Place the scale on a ���������
Rotate the power knob not less than 120º, the LCD display will show "0".
Place the food to be weighed on the scale (or in a bowl if required). The LCD will show the
weight results.
Img. 2.
Weighing units
Select between g, oz, lb:oz or ml (for liquids).
Img. 3.
Under weight mode, press the unit button to choose the unit. This button is located on the back
of the scale.
Note: Set the desired weighing unit before starting weighing. The unit cannot be changed
during the weighing process.
Tare function
Place the container on the device's platform. The LCD display will show the weight of the
container.
Press the tare function button to clear the weight of the container and reset to 0.
Place the ingredients inside the container. The display will show the weight of the food only.
The display will show negative values when the container and the food have been removed
from the scale. To clear it, press the tare function button and the display will show "0" again.
Img. 4.
Errors
e.
COOK CONTROL 10200 ECOPOWER INOX
ENGLISH
14