Philips PerfectCare Aqua Service Manual page 6

Disassembly advice
LIGHT STRIP CAP ASSY 1
INLAY AND LIGHT STRIP ASSY 2
REFLECTOR MOLDED 3
LED MICROSWITCH HOLDER ASSY 4
TRIGGER SPRING 5
TRIGGER MOLDED 6
MICA PLATE 7
PLASTIC WASHER (1x) 8 (FRONT)
DECORATION CAP PRINTED 9
Remove
Screw A
Disassemble LIGHT STRIP 1
Fig 1. Using "-" screw driver to lift up the Inlay and
release the catch at the end of the handle.
Fig . Position of the catch to be applied forces
at the end of the handle.
Iron
Apply forces
GC1615
Remove Screw B
Disassemble INLAY AND LIGHT STRIP ASSY 2
Disassemble REFLECTOR MOLDED 3
Remove Screw C
Disassemble LED MICROSWITCH HOLDER ASSY 4
Disassemble TRIGGER SPRING 5
Disassemble TRIGGER MOLDED 6
Remove Screw D
Disassemble MICA PLATE 7
Disassemble PLASTIC WASHER (1x) 1
Remove Screw E1, E2
Remove
Screw F
Disassemble DECORATION CAP PRINTED 8
RYTON RING 10
DEVIATOR HOUSING MOLDED 11
IRON THERMISTOR ASSY 12
PLSTIC WASHER (2x) 8 (REAR)
HOSE CORD MOUNTED ASSY 13
HOUSING PRINTED 14
SOLEPLATE MOUNTED ASSY 15
Remove
Screw A
Disassemble LIGHT STRIP 1
Remove Screw B
Disassemble INLAY AND LIGHT STRIP ASSY 2
Disassemble REFLECTOR MOLDED 3
Remove Screw C
Remove Screw E1, E2
Remove Screw D
Disassemble MICA PLATE 7
Disassemble PLASTIC WASHER (1x) 1
Disassemble RYTON RING 10
Remove Screw G1
Disassemble
DEVIATOR HOUSING MOLDED 11
Remove Screw H
Disassemble IRON THERMISTOR ASSY 12
Remove Screw I1, I2
Disassemble PLASTIC WASHER (2x) 1
Disconnect
Wires
Release Hose clip (2x)
Remove Screw J
Disconnect Wires
Disassemble HOSE CORD MOUNTED ASSY 13
Disassemble
HOUSING PRINTED 14
Disassemble SOLEPLATE MOUNTED ASSY 15
RI1645
G4
6-33