Philips PerfectCare Aqua Service Manual page 31

Repair Instruction
5.4. Perform Self Check mode Process Flow Chart
Entered
Self-Check mode
Refer TS tip #2
Refer TS tip #4
Iron LED, ECO LED &
Rinse LED fast blink
simultaneously
System activities
Technician actions
Troubleshooting tips to refer
Turn On:
• Pump for 1 sec
• ECO LED (green)
• Iron LED (blue)
Check pump, ECO
LED, Iron LED
Refer TS tip #1
Standby LED
Check LED
remains On
Check iron
NOK
temperature
sensing circuit
• Iron LED remains On
• E-valve opens
• E-valve closes
• All LED turn Off
Boiler & Iron heaters
turn on for 2 sec
ECO LED and Rinse LED
fast blink alternately
Self-Check mode
is completed
successfully
Press Power button
Power LED (blue)
& Rinse LED (red)
fast blinks
Press ECO button
Iron LED fast blinks
OK
while Power, ECO and
Rinse LED remains on
Press steam trigger & hold
Check E-valve and LEDs
Release steam trigger
Check power meter:
GC1615
Power LED &
Rinse LED
remains On
Check boiler
NOK
temperature
sensing circuit
OK
ECO LED fast blinks
Refer TS tip #5
Refer TS tip #6
2000 ˜ 2400W
RI1645
Refer TS tip #2
Check LED
ECO LED & Rinse
LED fast blink
simultaneously
Refer TS tip #3
31-33