Red-Eye Reduction Mode - Nikon Nuvis 200 Instruction Manual

Red-eye reduction mode

In flash photography, the subject's eyes may sometimes appear bright red. To reduce the "red-eye" effect, use this mode.
E
1
Press the button until "
@
appears on the LCD panel.
•Each time the button is pressed, the
@
display changes in the order indicated.
→
Cancel
↓
@
Red-eye reduction indicator
↓
C Self-timer indicator (-P. 25)
@
24
MOD
SEL
ADJUS
2
" Compose the picture and
@
lightly press the shutter
release button.
•Because the red-eye reduction lamp
lights up for a second before the flash
fires, be careful not to move the camera
or let the subject move until the flash
fires.
•The red-eye reduction mode is not
recommended when shooting fast-
moving subjects.
3
Check that the red LED
lights up before shooting.
•If the red LED blinks, lightly press the shutter
release button again and wait for the red LED
to light up before reshooting
•To cancel the red-eye reduction mode, press
the button until " "disappears from
@ @
the LCD panel. This mode can be canceled by
turning the power off.
•Red-eye reduction and flash cancel modes
can be set together, but in this case red-eye
reduction cannot be performed.