Nikon Nuvis 200 Instruction Manual page 27

4
Getting out of the setting
mode
▼ Press the SEL button and the
corrected date appears on the
LCD panel.
•If the camera is turned on while setting
the date/time, all the previously set data
will be set at this time.
•The date appearing in the illustration
above shows "2000, April, 25."
MOD
SEL
ADJUS
When the battery is replaced
•Note that " - - - " appears on the LCD
panel when the battery is replaced.
•No data will be recorded if " - - - "
appears on the LCD.
•Repeat procedures from 1 to 4 to set the
date and time.
E
27