Temperature Controls; Loading Product - coldline BBC-25 User Manual

TEMPERATURE CONTROLS

The temperature controls are factory-set to maintain an average temperature of 38 F
in refrigerators. To maintain a different temperature, simply adjust the control knob
located inside the unit.
To decrease the temperature (coIder), turn clockwise. To increase the temperature
(warmer), turn counter-clockwise - see diagram

LOADING PRODUCT

The bin dividers have been installed at the factory for your convenience. Feel free to
reposition the dividers as you see fit. To remove the bin dividers, simply push the
divider towards the back wall until the front of the divider is removed from the
positioning holes. To install, position the divider to the desired holes, making sure
that the pressure spring is installed properly.
PAY CLOSE ATTENTION TO THE LOAD LIMIT STICKERS LOCATED ON THE
INTERIOR WALLS OF THE UNIT. DO NOT LOAD PRODUCT ABOVE THE LOAD
LIMIT STICKERS OR ABOVE THE TOP CROSS BAR OF THE BIN DIVIDERS.
LOADING PRODUCT ABOVE THE LOAD LIMIT STICKERS WILL HARM THE
PERFORMANCE OF THE UNIT.
CAUTION
Setting the temperature control to the coldest setting may cause the evaporator coil
to freeze and ice up. This will eventually result in a warmer cabinet temperature.
2
USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE