Taking Pictures; Previewing A Picture; Setting The Lcd Display Mode - CONCORD 3045 User Manual

3 3 3 3 3

Taking Pictures

Previewing a Picture

Preview photos on the LCD screen before pressing the Shutter button.
1 Turn the Mode dial to Auto
2 Press POWER to turn on the camera.
3 The LED indicator next to the viewfinder flashes green.
4 The image automatically appears on the LCD screen together with informa-
tion about current camera settings.

Setting the LCD Display Mode

Use the DISP Button to toggle the LCD mode. The LCD mode changes each time the
button is pressed as follows:
1 Press DISP once to turn the on-screen information display (OSD) off.
2 In Auto, Manual, Video and Audio Modes, press DISP once to turn the OSD
off, twice to turn the LCD off, and once again to turn the LCD and OSD on.
3 Press DISP again to turn the image-only OSD on.
MN
OSD Mode: the image and on-screen infor-
mation OSD are shown on the LCD screen
Note:
• To save the battery power, you may turn off the LCD display.
• In the Playback (
available.
or Manual
38 38
07/24/2002 07/24/2002
) Mode, only OSD Mode and Image Only Mode are
— 13 —
mode.
Image Only Mode: the OSD information
does not appear on the LCD screen