Panasonic CF-VDRRT3W Operating Instructions Manual page 12

Connections to the Computer
Disconnecting the cable
Before disconnecting the interface cable, complete the data writing using the writing soft-
ware and the data reading as well as the music playback and other operations, and remove
the disc (media) from the drive.
CAUTION
When using a CD-RW disc with "B's CLiP," move the cursor to the "B's CLiP"
E
icon on the taskbar and right-click it, select [Eject], and then disconnect the inter-
face cable.
Be sure to follow the procedure below. Unless the correct procedure is observed, it
may not be possible to use the drive when the drive is connected next time.
1
Double-click
then select [Stop].
(When the interface cable has been removed after the computer is turned off, this step is
not necessary.)
2
Select [GENERIC CDRCB06 USB Device], then select [OK].
3
Remove the interface cable.
Select [Close].
12
on the taskbar and select [USB Mass Storage Device],