Local Air Conditioner Care; Draining The Air Conditioner; Draining The Air Conditioner(Heating Models); Cleaning The Outside - Hisense APC09 Use And Installation Instructions

Draining the Air Conditioner

A
B
NOTE: If the air conditioner will be stored after use, see

"Storing After Use".

Draining the Air Conditioner(Heating models)

D
D. Primary drain plug

LOCAL AIR CONDITIONER CARE

WARNING: Please connect the drain hose on heating
mode, or the unit will stop running after the water the water
reaches warning level.
1. Uncover the primary drain port.
2. Attach the drain hose to the primary drain hose.
Make sure the connector has no water leak.
3. Place the other end of drain hose into a outfall. Check to
see that the hose lies flat and is in the drain. Make sure
the hose end that goes to the drain is on a lower level
than the hose end that connects to the unit. The hose
should not be kinked or pinched.

Cleaning the Outside

1. Press ON/OFF to turn off the air conditioner.
2. Unplug the air conditioner or disconnect power.
3. Remove the air filter and clean separately. See "cleaning the
Air Filter . "
4. Wipe the outside of the air conditioner with a soft, damp
cloth.
5. Plug in the air conditioner or reconnect power.
6. Press ON/OFF to start the air conditioner.
NOTE: Do not wash the filter in the dishwasher or use any
chemical cleaners.
If the air conditioner will not be used for an extended
period of time:
Drain the water completely. See "draining the Air
Conditioner . "
26