Table of Contents
Advertisement
Temporary installation
1.
Twist the housing adaptor and the window Connector to the ends of the exhaust hose.
2.
Insert the fixing clip of the housing adaptor into the openings at back of the air
conditioner.
3.
Put the other end of the exhaust hose to the near windowsill (see Fig.9).
Window Slider Kit Installation
The installation manner of window slider kit is mostly in "horizontal" or "vertical". As
shown in Fig.10 and Fig.10a, check the min. and max. size of the window before the
installation.
1. Install the window kit on the window (Fig.10, Fig.10a);
2. Adjust the length of the window slider kit according to the window width or height, and fix it
with the dowel;
3. Insert the window connector of the hose to the hole of the window kit (Fig.11).
Fig.10
Fig.11
21
Fig.10a
Advertisement
Table of Contents
