Panasonic BM-ET200 Operating Instructions Manual page 8

• As a recognition iris reader for iris recognition
Iris data of up to 5 025 users can be distributed from the iris server to iris readers. If the iris data of user has been distrib-
uted to a recognition iris reader, or if a card reader (connected to a recognition iris reader) reads the iris data out of a card,
the iris reader can recognize the user in approx. 0.3 seconds after iris image capturing.*
tion result with the result indicator (accept/reject) on the front panel of the iris reader.
Enrollment
Enrolled iris data is distributed
to iris readers.
Recognition
(1) Captures the iris images of both eyes.
(2) Recognizes a user by checking the iris images with the iris data
(that is distributed to the iris reader or that is read out by the card
reader connected to the iris reader). *
(3) Indicates the recognition result.
NETWORK MODE
Administration
software
2
* The recognition time may differ depending on capturing conditions.
3
* The iris reader captures the iris images of both eyes at the same time, but the iris data of each eye is enrolled separately.
Enrollment/recognition by one eye capturing is also available.
4
* Refer to BM-ES200 Operating Instructions
(supplied with Administration Software BM-ES200) for details on available cards and card writers.
5
* Capturing diagnosis is made by the administration software at the time of enrollment.
6
* The user is recognized with the iris data of either eye.
7
* Up to 256 iris readers (enrollment and recognition iris readers) can be connected to the iris server in the LAN.
8
* The UL Listed card reader when employed must be suitable for use with the selected UL Listed Access Control Panels.
Refer to the UL Listed Access Control Panels Installation Instructions for compatibility with the UL Listed card readers and
compatibility with the BM-ET200.
• Iris recognition technology is a way to identify a person with iris patterns (an iris is the thin
plate-shaped film in front of the eyeball), which differ among each person. The iris pattern of
the left eye differs from that of the right eye.
• Using iris readers, users can carry out recognition without touching any devices.
• In the iris recognition process, the users are recognized with the enrolled iris data.
8
7
For enrollment*
For recognition*
6
Iris server
DB
LAN
LAN
Iris reader
(for Enrollment)
Captures iris images of both eyes, generates iris data from the iris
images, and enrolls the iris data in the iris server. *
If a card writer is connected to the iris server, iris data enrolled in
the iris server can be written into a card. *
If no corresponding iris data has been
found in
the iris reader, the iris reader
accesses the administration software
to execute server certification.
Administration Software BM-ES200*
7
User Licence Software BM-EU30000E Series
Access control panel *
LAN
LAN
Wiegand/RS-485
Wiegand/
RS-485
Iris reader Card reader *
(for Recognition)
Wiegand/RS-485
Wiegand/
RS-485
Card reader *
Iris reader
(for Recognition)
2
The user can check the recogni-
3
4
Iris server
Card writer
5
Iris database
8
8
Access control server *
8
Electric lock
8
Iris
Pupil
Retina