Panasonic BM-ET200 Operating Instructions Manual page 79

Code Details
1-19 Recognition Method was updated.
1-20 PIN was deleted.
1-21 The Reader was started.
A-01, A reader part may have failed.
A-07
A-16,
A-19
A-08 The reader may be disconnected from the
Access Control Panel.
A-09 The reader may be disconnected from the Card
Reader.
A-10 An unauthorized person may have accessed
the reader unit.
A-11 An unauthorized person may have accessed
the reader unit.
A-12 The reader unit may have been removed or the
cover may be open.
A-13 The reader tamper-detection function has been
disabled.
A-14 The reader clock may have failed.
A-15 An Option Board is Not Installed in the Iris
Reader.
A-17 Error in Card Reader settings.
A-18 Error in Access Control Panel settings.
A-20 Software download may failed.
Remarks
Saved when the Recognition Method was updated.
Saved when the PIN was deleted.
Saved when the reader was started.
When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.
Check if the power is supplied to the access control panel and the
iris reader and access control panel is properly connected.
Check if the power is supplied to the card reader and the iris read-
er and card reader is properly connected.
An unauthorized person may have accessed the iris reader.
A person may have accessed the iris reader with an improper item
instead of the person's iris.
Check if the iris reader is installed properly and if the cover is open.
Check if the iris reader is installed properly and if the cover is open.
When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.
Check if the interface board is installed inside the iris reader.
Check the settings of iris reader and card reader.
Check the settings of iris reader and access control panel.
Software download may have failed. Retry downloading software.
79