Setup (Stand-Alone Mode); I Available External Devices; I List Of Settings - Panasonic BM-ET200 Operating Instructions Manual

Setup (Stand-alone Mode)

This iris reader can be operated in the stand-alone mode or network mode. Iris server is not required in the stand-alone mode,
but required in the network mode. Refer to BM-ES200 Operating Instructions (supplied to Administration Software BM-ES200)
for details on network mode operation.
This section describes the settings and operations of stand-alone mode.
Numeric key (option) or web browser is used for setup.
Maximum number of users: 50 (Total of users and users with the operator's privilege)
Maximum number of administrators: 3
Maximum number of log information
System log: 1 000
Access log: 10 000
(When the saved system logs or access logs reach the maximum number, the older logs will be deleted chronologically.)

I Available External Devices

This iris reader can be connected with the following external devices.
External storage device (USB Mass Storage Class compliant, FAT32 file format)
Numeric key (HID1.1 compliant)
Numeric key with the USB hub
(When using both of external storage device and numeric key, choose a keypad with the USB hub.)
• Refer to the illustration in p. 7 for system configuration example.
• Refer to the dealer for details on available external devices.

I List of Settings

In the stand-alone mode, the following operations are available. Available users of numeric key control and web browser con-
trol.
Administrator: Web browser control is available. (Numeric key control is unavailable.) Refer to p. 37 for details.
Users with the operator's privilege: Numeric key control is available. (Web browser control is unavailable.) Refer to p. 53 for
details.
Users: PIN change with the numeric key is available. (Other controls are unavailable.) Refer to p. 76 for details.
Setting Item
Shift between recognition
mode ↔ administrator
mode
Setting of operation/
recognition
Language setting of
voice guidance
Audio Mode
(Mute, Simple, Full)
Output setting of Output
1 (Recognized Signal)
32
Web browser control
–
[Reader Setting] –
[Recognition Method]
[Reader Setting] –
[Operation Info.]
[Reader Setting] –
[Operation Info.]
[Reader Setting] –
[Operation Info.]
Numeric key Administrator
OK –
OK OK
OK OK
OK OK
– OK
Users with the oper-
Users
ator's privilege
OK –
OK –
OK –
OK –
– –