Panasonic BM-ET200 Operating Instructions Manual page 22

Factory
Pin No.
default
SW1-1 OFF
SW1-2 OFF
SW1-3 OFF
SW1-4 OFF
G Setup Switches of Interface Board SW2
Factory
Pin No.
default
SW2-1 OFF
SW2-2 OFF
SW2-3 OFF
SW2-4 OFF
22
Setting name
RS-485 termination Selects whether to
(access control activate the termina-
panel) tion of the RS-485
connection with the
access control panel.
RS-485 termination Selects whether to
(card reader) activate the termina-
tion of the RS-485
connection with the
card reader.
Not used _
Not used _
Setting name
Communication I/F 1 Selects the interface
(access control for connection with
panel) access control panel.
Determines the func-
tions of w-7 to w-10.
Communication I/F 2
(access control
panel)
Communication I/F 3 Selects the interface
(card reader) for connection with
card reader.
Communication I/F 4
Determines the func-
tions of w-1 to w-4.
(card reader)
Function ON
RS-485 ter-
mination
ON
RS-485 ter-
mination
ON
Do not set.
Do not set.
Function ON
Wiegand
Wiegand
Wiegand
Wiegand
OFF Remarks
RS-485 ter- Available only when SW2-1
mination and SW2-2 are OFF (RS-
OFF or 485 is selected). When
Wiegand selecting Wiegand, surely
set this switch to OFF.
Otherwise, communication
may not be established.
RS-485 ter- Available only when SW2-3
mination and SW2-4 are OFF (RS-
OFF or 485 is selected). When
Wiegand selecting Wiegand, surely
set this switch to OFF.
Otherwise, communication
may not be established.
Factory _
default
Factory _
default
OFF Remarks
RS-485 Surely set SW2-1 and
SW2-2 to the same posi-
tion. If the setting is mixed,
communication may not be
established.
RS-485
RS-485 Surely set SW2-3 SW2-4 to
the same position. If the
setting is mixed, communi-
RS-485
cation may not be estab-
lished.