Table of Contents
Advertisement
Installation
<When the AK-HC1500 camera is used>
Attach the positioning 1 screw (supplied) to the
camera mount .
Attach the camera mount using the 2 screws , flat
washers and spring washers (supplied).
(The camera mount points toward the front or back in
the opposite way from a convertible camera. For pointing
upward or downward, make sure that the two sides of the
camera mount are higher — which is the opposite from
when the AK-HC910 is used — than the central area that
is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction from
when the AK-HC910 is used as the camera.
To ensure that none of the screws are loose,
use a tool to tighten them up securely.
20
Advertisement
Table of Contents
