Panasonic AW-PH650N Operating Instructions Manual page 18

Installation
<When the AW-E350 or AW-E650 camera is used>
Use the 2 screws  supplied with the camera to attach

the mounting adapter  (supplied with the camera) to
the top panel of the camera.
Attach the positioning screw  (supplied) to the camera

mounting spacer  .
Use the 2 screws  (supplied) to attach the camera

mounting spacer  to the mounting adapter  (supplied
with camera) on the top panel of the camera.
Attach the camera mount  to the camera mounting

spacer  using the 2 screws  , flat washers  and
spring washers  (supplied).
(Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
Attach the lens to the camera.

Remove the lens hood and zoom lever.








The camera mount in the opposite direction from when the AW-E655 is used as the camera.
To ensure that none of the screws are loose, use a tool to tighten them up securely.
<When the AW-E750 or AW-E860 camera is used>
Attach the positioning screw  (supplied) to the camera

mounting spacer  .
Use the 2 screws  (supplied) to attach the camera

mounting spacer  to the fan mounting seat  on the
top panel of the camera.
Attach the camera mount  to the camera mounting

spacer  using the 2 screws  , flat washers  and
spring washers  (supplied).
(Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
Attach the lens to the camera.

Remove the lens hood and zoom lever.


18







