Ground Sonar Module; Led Indicators - Lowrance ActiveTarget 2 Installation Manual

Ground sonar module

You can earth-ground the sonar module using the terminal on the top of the case. This
terminal is DC isolated from power to eliminate the risk of galvanic corrosion.
For installations that suffer from noise issues, the grounding terminal allows you to
connect to various possible ground points. The grounding point can be the vessel's
bonded earth-ground, non-bonded RF ground, or battery minus (DC negative). We
recommended you use a 4 mm
¼ Note: No DC power will flow through the connected conductor.

LED indicators

LEDs on the sonar module indicate the module's status.
LED
Power
Ethernet
Transducer
(12 AWG) or thicker wire.
2
Description
Solid green during power up.
When started, alternates between green and red.
Flashes when there's network activity.
Solid green when active. OFF when inactive.
19