Panasonic AJ-RC10G Operating Instructions Manual page 8

Parts and functions
Camera recorder/Scene file operation
!1" !2" !3" !4"
H
!9"
!1" RECORDER ENABLE button
For switching between the recorder mode
and the scene file mode
When the lamp is on:
Recorder mode
Buttons from !3" to !8" are operated as
control buttons for the recording.
When the lamp is off:
Scene file mode
Buttons from !3" to !8" are operated as the
buttons for reading and storing scene
files. When the power is turned on, the
unit is in this state.
!2" REC.INH/LOAD button
In recorder mode:
When the lamp is on, the REC S/S button !8"
is inhibited.
However, even if the unit is in the recording
inhibition state, operation of the USER
button assigned REC function and operation
of the REC button on the camera recorder
are enabled.
The lamp is off when the power is on.
In scene file mode:
The button is operated as the LOAD switch
of the scene file. Data are retrieved from the
file on the remote controller.
E-7
(Continued)
!5" !6" !7" !8"
!3" REW/1 button
In recorder mode:
This button is operated in the same way as
the REW button on the camera recorder,
and the lamp is on when a tape is rewinding.
In the scene file mode:
1 is selected as the number for the scene
file to be saved or loaded.
!4" FF/2 button
In recorder mode:
This button is operated in the same way as
the FF button on the camera recorder, and
the lamp is on when a tape is fast-
forwarding.
In scene file mode:
2 is selected as the number for the scene
file to be saved or loaded.
!5" STOP/3-button
In recorder mode:
This button is operated in the same way as
the STOP button on the camera recorder,
and the lamp is on when a tape stops.
In scene file mode:
3 is selected as the number for the scene
file to be saved or loaded.
!6" PLAY/4-button
In recorder mode:
This button is operated in the same way as
the PLAY button on the camera recorder,
and the lamp is on when a tape is replayed.
If the button is pressed again during tape
replay, it changes to replay/pause, and the
lamp flashes.
If the button is pressed one more time, the
unit returns to replaying, and the lamp is on
continuously.
In scene file mode:
4 is selected as the number for the scene
file to be saved or loaded.