Operation - Fein BF10-280ET Instruction Manual

3 41 01 134 21 0.book Seite 15 Freitag, 15. Mai 2009 11:38 11

Operation.

Only press and hold one of the 4
switchpads, to keep the working belt-
speed of the belt sander continuous.
Notes: The switchpads actuate easily in order
to prevent tense working postures. Changing
the working posture is possible at any time by
changing the switching position. As long as
the sanding belt is not automatically being
braked, the belt sander can be brought up to
the working belt-speed again by pressing one
of the 4 switchpads within 0.5 seconds.
Stopping (Figure 11).
Release all switchpads. The sanding
belt gradually stops.
Fig. 11
en
15