Preparation
Upgrading the Navigation Software
Once the version is updated, it cannot be restored to the
former version.
1 Start the engine.
(Or turn the key to ACC.)
2 Select [I agree] on the WARNING
screen.
3 Press
The Open/Tilt/Eject screen is displayed.
4 Select [Disc].
The monitor opens.
If there is a disc inside, it is ejected automatically.
5 Insert the program disc.
10
The monitor closes automatically.
10
.
Printed side
6 Select [Yes/Oui/Sí].
The program starts to load.
Do not turn off the engine while the program is
loading. (Do not switch ACC OFF.)
If program loading is interrupted, it will start
again from the beginning the next time the
engine is turned on (or the next time ACC is
turned ON).