Use Your Robovac With Amazon Alexa / The; Enable / Disable The Child Safety Lock; Cleaning And Maintenance; Clean The Dust Box, Water Tank, And Filter - EUFY RoboVac LR30 Hybrid+ Owner's Manual

Hide thumbs Also See for RoboVac LR30 Hybrid+:
Table of Contents

Advertisement

Available languages

Available languages

Use Your RoboVac with Amazon Alexa / the Google
Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables
you to control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the auto empty station to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot and
Amazon Tap, Echo Show, Echo Spot) or a device enabled with the Google Assistant
(i.e. Google Home, Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or the Google
Assistant:
1. Open the EufyHome app and find "Smart Integrations" in the top left.
2. Follow the on-screen instructions to complete the setup.
• Currently, this feature only supports English, German, French, and
Spanish. For more supported languages, check https://www.eufylife.com/
support/.

Enable / Disable the Child Safety Lock

Press and hold the
button for 3 seconds to turn on the child safety lock. Once
the child safety lock is enabled, RoboVac will not respond if any button is pressed to
protect children from accidentally getting hurt.
• To disable the child safety lock, press and hold the
• This function is also available in the EufyHome app.
28 EN
button for 3 seconds again.

Cleaning and Maintenance

Before cleaning and maintaining, turn off the device and unplug the adapter.
For optimal performance, follow the instructions below to clean and maintain RoboVac
regularly. The cleaning / replacement frequency will depend on your RoboVac usage
habits.
Recommended Cleaning / Replacement Frequency
RoboVac Part
Cleaning Frequency
Dust box and water tank
After each use
Once a week (Twice a week
Filter
if you have a pet)
Side brushes
Once a month
Side brushes
Once a month
Brush guard
Once a month
Rolling brush
Once a month
Sensors
Once a month
Charging pins
Once a month
Swivel wheel
Once a month
Mopping cloth
After each use
Dust bag
-

Clean the Dust Box, Water Tank, and Filter

1
Press the release button to remove the dust box and water tank.
Replacement Frequency
-
Every 6 months or after
every 50 rounds of cleaning
Every 3-6 months (or when
visibly worn)
Every 3-6 months (or when
visibly worn)
Every 3-6 months (or when
visibly worn)
Every 6-8 months
-
-
-
-
Once a month or after every
50 rounds of cleaning
EN 29

Advertisement

Chapters

Table of Contents
loading

Table of Contents