Performance; Names Of Each Parts - Hitachi UST-5299 Instruction Manual

2-3. Performance

For measurement tolerances, operating tolerances and other data, refer to the instruction manual for the
ultrasound diagnostic instrument.
2-4. Name of each parts
Probe tip
This area is held during operation.
Front mark
The protrusion indicates the direction
of the front mark (direction mark) on
the image display.
Caution
Do not pull, bend, twist, or apply excessive force to the cable.
The conductors may break and the cable may become unusable.
Do not subject the ultrasonic radiation part to hard impact.
The impact may cause damage to the transducer, and that results in noise or no echo in the image.
In most cases, the ultrasonic radiation part itself is not damaged because the part is made of elastic
material.
Cable
This cable propagates the ultrasonic signals
that are sent and received.
Ultrasonic irradiation area
This incorporates an electronic sector
transducer.
-11-
Connector
This is the part that connects the ultrasound
diagnostic instrument and probe. Follow the
instructions in section 4-2.
MN1-5001 Rev. 21