Adjusting Your Monitor Image; Using Direct Access Controls - Lenovo Legion Y27f-30 User Manual

Adjusting your monitor image

Using direct access controls

This section describes the control features to adjust your monitor images�
Direct access controls can be used when the On-Screen Display (OSD) is not displayed�
Icon Control
Power
1
(Under any situation)
Menu
(No menu on the screen)
Enter
(Main menu)
Increase
(Main menu)
Volume
(No menu on the screen)
Decrease
(Main menu)
2
Volume
(No menu on the screen)
Back
Exit(Main menu)
Up
(Main menu)
Brightness
(No menu on the screen)
Down
(Main menu)
Brightness
(No menu on the screen)
Game Mode
3
(No menu on the screen)
Input Source
(No menu on the screen)
4
OSD locked/un-locked
Description
DC Off / On
Opens the main menu
Enters the next menu
OK
1� Press to Increase current value on adjustment
bar
2� Press and hold for 3 seconds, and then the
adjustment bar will increase by 10 units� Press
and hold for 5 seconds, and then the number of
the adjustment bar will hit the maximum�
Quickly enters the Volume adjustment page
1� Press to decrease current value on adjustment
bar�
2� Press and hold for 3 seconds, and then the
adjustment bar will increase by 10 units� Press
and hold for 5 seconds, and then the number of
the adjustment bar will hit the minimum�
Quickly enters the Volume adjustment page
Returns to the previous menu
Exits the menu
Moves the cursor up
Quickly enters the Brightness adjustment page
Moves the cursor down
Quickly enters the Brightness adjustment page
Quickly enters the Game Mode adjustment page
Quickly enters the Input Source adjustment page
Press and hold for 10 seconds ,then Main menu
will be Locked/un-Locked�
Chapter 2� Adjusting and Using your monitor 2-3