Table of Contents
Advertisement
Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer� Therefore, refer to your
computer documentation on how to change display modes�
The image size, position and shape might be changed when the display mode changes� This is
normal and the image can be re-adjusted using automatic image setup and the image controls�
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free�
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 1920 x 1080 at 240 Hz, which
is a common display mode�
The display modes shown below have been optimized at the factory�
Table 2-2. Factory set display modes
Address ability
720 x 400
640 x 480
800 x 600
1024 x 768
1280 x 1024
1440 x 900
1600 x 900
1680 x 1050
1920 x 1080
480p
576p
720p
1080p
Refresh rate
70 Hz
60 Hz, 72 Hz, 75 Hz
60 Hz, 72 Hz, 75 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz, 70 Hz, 75 Hz
60 Hz
60 Hz, 75 Hz
60 Hz
120 Hz, 180 Hz, 240 Hz, 280 Hz (Over Clock)
60 Hz
50 Hz
50 Hz, 60 Hz
50 Hz, 60 Hz, 120 Hz
Chapter 2� Adjusting and Using your monitor 2-7
Advertisement
Table of Contents
