Summary of Contents for Living Spaces Sedona 7030-01250 KIT
Page 1
7030-01250 KIT For: 4720 Frame Rails/4721 Bunk Ends Sedona Collection: High Sierra Bunk PARTS LIST BOX 1: 4721 High Sierra Bunk Ends Part # Picture Description Quantity S1010END High Sierra Bottom Bunk End S1011END High Sierra Top Bunk Left End S1012END High Sierra Top Bunk Right End BOX 2: 4720 High Sierra Frame Rails...
Page 2
1) Attach two mattress rails (S1002SRL) to two bottom end assemblies (S1010END) with 8 lag bolts and 8 washers (5040-43181), and tighten. 2) Attach two mattress rails (S1002SRL) and two guard rails (560750001) to left top end assembly (S1011END) and right top end assembly (S1012END) with 16 lag bolts and 16 washers (5040-43181), and tighten.
00700 SAFETY WARNING Our Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1.
Page 5
7030-00420 STAIRWAY /BUNK 4453 / 4493 / 4676 STAIRWAY CHEST WITH BUNK BED The stairway chest has been designed for use as a free standing unit. However for your convenience, if you desire to attach the stairs to your bunk bed we have included four 2" angle brackets.
Page 6
4453 / 4493 / 4676 STAIRWAY CHEST THE DRAWERS OF YOU STAIRWAY CHEST HAVE BEEN SECURED FOR SHIPPING WITH SECURITY STRIPS. TO RELEASE THESE STRIPS PULL EACH DRAWER FIRMLY OUT UNTIL YOU FEEL THE STRIP RELEASE. EACH DRAWER WILL FUNCTION PROPERLY AFTER THE FIRST TIME YOU PULL THEM OUT. THERE IS NO NEED TO ATTEMPT TO REMOVE THE SAFETY STRIPS AS THEY WILL NOT INTERFER WITH THE PROPER USE OF EACH DRAWER.
Page 7
7030-01195 KIT (Scan code for instructional video) Sedona Collection: Knob Installation 1. Locate the box containing your knobs in the bottom drawer of your case good. 2. Identify which of the screw sizes is correct for your drawers/doors. The screw should protrude no more than 1/4"...