On-Hook Dialing - Panasonic WORKIO DP-150 Operating Instructions Manual

Sending Documents

On-Hook Dialing

For On-Hook Dialing, follow the steps below.
Make sure that the FAX Mode indicator is ON. If not, press
1
2
MONITOR
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad or use
Directory Search Dialing.
Ex:
5 5 5 1 2 3 4
4
When you hear a beep,
START
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. If you need a special access number to get an outside line, dial it first then press
pause (represented by a "-") before dialing the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. On-Hook Dialing is only available from the ADF. If you need to send pages from a Book or originals that can not
be fed through the ADF, make a copy on the Platen Glass first then use the ADF for Voice Mode Transmission.
Set the original(s) face up on the ADF.
abc..
- +
FAX
to select the "FAX MODE".
FAX
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
* DIALING *
5551234
ON LINE * XMT *
REDIAL/PAUSE
1 2 3
4 5 6
7 8 9
0
START
MONITOR
to enter a
TONE
55