Table of Contents
Advertisement
Installation
Please follow the steps below to install the router:
Step1:
Insert SIM card into the router with direction shown below until it clicks.
Step2:
Connect one of the LAN ports (any will do) on the router to your PC with a RJ-45 Ethernet cable
provided.
Step3:
Insert the power cord into the DC-12V power jack of the router; and insert the correct plug into
your home's power outlet.
Step4:
Switch the power ON. The router will start the booting process. After a few seconds, the LED
lights will start blinking with blue color.
Step5:
When the router has booted up, you will see the following LED lights on in solid color: the LTE
(Green) or 5G (Blue). You can now connect your devices to the router via Ethernet or over WiFi.
The network name (SSID) and password (Key) can be found on the label underneath the router.
5
Advertisement
Table of Contents
