LED Indicators LED Indication Color Status Description Bottom LED - Blue 5G (SA/NSA) On Device connects to 5G network 5G/LTE/3G/Ethernet Green LTE/3G On Device connects to LTE/3G network Wan/Alarm Orange Ethernet WAN Device connects to Internet via Ethernet WAN Alarm System Alarm ON •...
• LED ON for either SIP or VoLTE has been activated Blue Blinking • While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the Voice LED color is Blue. Top LED – Voice SIP or • While UE connects to 4G network (LTE/3G), the Voice LED color is Green. VoLTE enabled Blinking Green...
Installation Please follow the steps below to install the router: Step1: Insert SIM card into the router with direction shown below until it clicks. Step2: Connect one of the LAN ports (any will do) on the router to your PC with a RJ-45 Ethernet cable provided.
If you would like to change any of the router default settings, such as the WiFi network name SSID or Key, please access the browser on a device that is connected to the router. Step 1. Open the Web browser and enter the default IP address of FGW5500: https://192.168.15.1 Step 2.
Page 7
Step 3. For more features setup, please refer to user manual on https://www.linksys.com/linksys- support LNKPG-00978 Rev. A00...