Figure 2: Assembling the Coaxial Connector
Protruding
Conductor
2 Using the crimping tool, prepare the cable to the strip dimensions
Figure 3: Coaxial Cable Stripping Dimensions
3 Insert the stripped cable into the plug body until the conductor is exposed (front end) and the
dielectric bottoms are inside the body.
4 Crimp the center contact using the crimp area C. Crimp at base of center contact, avoid crimping
at the tip. Refer to
Coaxial Cable Stripping Dimensions
5 Push the collar forward onto the plug assembly, and then fit the cable braid over the support
sleeve of the connector.
Flared
Braid
Connector
Body
Cable Inserted into
Connector Body
Crimp Center
Contact after
Inserting Cable
Center
Collar Slipped
Forward over
Connector Body
Ferrule
Collar
Push Ferrule Forward
over Braid. Flange
Butts against Connector
Body. Crimp Ferrule to
Complete Crimp
MAEPF-27622-O
A
B
Dim. A = 15/16"
C
Dim. B = 19/32"
Dim. C = 19/64"
MAEPF-27623-O
MN007792A01-AA
Chapter 2 : Installation
11