Volume Indicator Display Example; Materials; Pipe E Opera On; Pipe Ng Guidelines - LABBOX EASY 40 Xpert User Manual

4.5 VOLUME INDICATOR DISPLAY EXAMPLE

EASD-X02
2
2
5
2.25 μl
EASD-1KX
1
0
0
0
1 ml

4.6 MATERIALS

NOTICE! Aggressive substances may damage components,
consumables and accessories.
• Check the chemical resistance before using organic solvents or
aggressive chemicals.
• Only use liquids whose vapors do not a ack the materials used.
5 PIPETTE OPERATION
5.1 PIPETTING GUIDELINES
• Check the p cone to make sure it is clean.
• While using the pipe e make sure that opera ng plunger is
handled slowly and smoothly.
• Ensure that the p is firmly a ached on the p cone. Please
check for foreign par cles and remove if any, around the p
cone.
• Make sure that the temperature of p, pipe e and liquid are at
equilibrium.
• While aspira ng, hold the pipe e in upright posi on and keep
the ps at a constant depth below the surface of the liquid.
• Pre-rinse the pipe e p before aspira ng the sample by
filling and emptying the pipe e p five (5) mes. This is
important when dispensing samples that have a viscosity and
density different from water and for vola le solvents.
• Do not pre-rinse the
temperatures different from the current ambient
temperature. Be sure to change the pipe e p a er each
pipe ng.
• For the vola le solvents you should saturate the air-cushion of
your pipe e by aspira ng and dispensing the solvent
repeatedly before aspira ng the sample.
• When pipe ng liquids with temperature different to the
ambient temperature, pre-rinse ps p several mes before
use.
EASD-X10
1
0
0
10 μl
EASD-5KX
4
8
5
4.85 ml
p when pipe ng samples with
- 6 -
EASD-X20
1
8
3
18.3 μl
EASD-1XX
0
9
3
9.30 ml
EASD-10X
1
0
0
0
100 μl
EASD-30G
3
0
0
300 μl