Result Page - Epson TM-P20II Reference Manual

10.4.2.3 Result Page

After the "Import" button is pressed, the top page is shown in the main frame if importing is successful.
After the "Import" button is pressed, the result is shown in the main frame if importing fails.
10.4.2.3.1 Image
10.4.2.3.2 Setting Result
"Invalid file."
"Invalid date and time."
"The certificate has expired. Check if the certificate is valid, or
check the date and time on the product."
"Shutting down."
"Restarting communication may take a few minutes."
"If you want to change the settings, close the Web Config
and check your IP address. Then enter your IP address in the
browser to restart the Web Config."
"Setup failed."
Note: If the size of a certificate to be imported is larger than 24KBytes, the device is unable to read it and a Web browser error is
shown.
Figure 10-25 Result Page
Items
Table 10-60 Result
This message is shown in the following cases.
- The file uses an incorrect format or wrong interrelation.
- The file size is greater than the stipulated range of 5k to
24k. (See the note.)
This message is shown when an expired certificate is
imported, and the date and time are not set.
This message is shown when an expired certificate is
imported, and the date and time are already set.
This message is shown when network rebooting is
successful.
This message is shown when importing or network
rebooting fails.
Setting Result
Description
76