Cho O Si Ng Your Sourc E - La Boite Concept LX X User Manual

6. The LX X will automatically go into standby mode if you leave your device without signal for
30 minutes. The standby LED light will turn red. To wake up the device, press the control knob
or play music from either sources.
7. To temporarily put the LX X into "off" mode and avoid power consumption, turn the volume
control knob counter clockwise to the "OFF" point until you hear a "click" sound.
8. To fully swith the LX X off, switch the master ON/OFF at the back of the loudspeaker (please
refer to the drawing on page 57). All the LED lights are now off and the USB power discon-
nects. .

3 . CHO O SI NG YOUR SOURC E

Once you have set up your connections on the input panel, you can select the source you want
to use by pressing the corresponding button on the control panel (from 1 to 7).
/ Selecting the source
/ Selecting the source
/ Selecting the source
/ Selecting the source
to connect your vinyl turntable. This source is linked to the RCA/Phono button located on the
input panel.
64
corresponds to (1) the Bluetooth connection with your devices.
corresponds to (2) the Bluetooth pairing with your devices.
corresponds to (3) the AUX input.
corresponds to (4) the Phono or RCA inputs provided
RCA mode: for a line level input (CD, DVD, ...) or to use if
your turntable is pre-amplified.
RCA mode: to use with the cable with the two audio ends
(one RCA end and one stereo 3,5mm end) provided.
Phono mode: if your turntable is not pre-amplified (tradition-
al turntable with a ground output).