Honda VFR1200X 2012 Owner's Manual page 76

3. Install the new clutch oil filter with the
rubber seal facing in, toward the engine.
You will see "IN-SIDE" mark on the
clutch oil filter body, near the seal.
4. Replace the O-ring and apply a thin coat
of engine oil to the new O-ring when
before installing it.
5. Install the spring and the clutch oil filter
cover.
6. Install the clutch oil filter bolts A, B and
tighten.
7. Apply a thin coat of engine oil to the
rubber seal of a new engine oil filter.
P. 70
2
8. Install a new engine oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Engine Oil u Changing Clutch Oil Filter (VFR1200XD only)
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 29 N·m (3.0 kgf·m, 21 lbf·ft).
10. Fill the crankcase with the recommended
oil (
2
Required oil
When changing oil, engine oil
filter & clutch oil filter:
engine oil filter:
4.0 litres (4.2 US qt, 3.5 Imp qt)
11. Check the oil level.
12. Check that there are no oil leaks.
13. Install the right engine heat guard and
right under cowl.
P. 57) and install the oil fill cap.
P. 68
2
73