Draytek Vigor2765 Series Quick Start Manual page 18

Note If t he WAN 1 IP address displayed begins wit h 172. 16. x. x, it ' s
possible t hat t he ISP has not accept ed t he supplied Username
and Password f or t he Int ernet connect ion.
Check t hat t he ISP Access Set up - Username and Password mat ch
t he det ails supplied by your ISP.
4 . 2 . 2 D H C P /
4 . 2 . 2 D H C P /
1. Go t o [WAN] > [General Setup] and click on t he WAN1 link:
2. On t he set t ings page:

Set t he Enable opt ion t o Yes t o act ivat e t he WAN1 connect ion

Set t he Act ive Mode t o Always On

Enable t he Service – VLAN Tag insertion

Set t he Tag value set t ing t o 101

DSL mode can be set t o " VDSL2 only" but t his is not required
Note The VLAN t ag value of 101 is required t o connect t o ISPs t hat
operat e on t he Openreach VDSL2 net work, if your ISP operat es on
a dif f erent VDSL2 net work, t his t ag value may dif f er.
Please check wit h your ISP or t he DrayTek UK Knowledgebase f or
ISP specif ic guides.
S t a t i c I P c o n
S t a t i c I P c o n
n e c t i o n w i t h
n e c t i o n w i t h
14
F T T C V D S L 2
F T T C V D S L 2