Table of Contents
Advertisement
VELA
TANGO
EL
vl1935.dk/charge
VELA
TANGO
EL
TANGO
1 4
2.0.17. STROLLING BRACKET*
Strolling bracket for transporting a person in the chair. The
strolling bracket is mounted to fittings under the seat using
two finger screws. This is also where the depth is adjusted. The
height is adjusted by pressing the two buttons on the side of
the bracket while the handle is positioned at the desired height.
2.0.18. CHARGING (ELECTRIC)*
Daily charging is recommended . Remove the operation plug
from the back of the armrest and place it in the charger as
shown. The charger is plugged into an electrical outlet. When
the chair is charging, the LED on the charger is yellow. When
the chair is fully charged, the LED turns green.
Note: The chair should not be used during charging.
2.0.19. HAND BOX (ELECTRIC)*
The hand box is used via push buttons on the front.
VELA hand boxes can have one or more functions.
The icons on the hand box show the button functions.
Note: Insert plug in hand box to operate functions.
Warning: The chair's operating specifications for temperature
change when using the hand box to + 5°C to + 40°C!
2.0.20. ELECTRIC BRAKE (ELECTRIC)*
The electric brake is activated and deactivated using the hand
box or switches. It is advisable to activate or deactivate the
brake completely when using this feature. Can also be used
VELA
together with the 4-wheel brake (see section 2.0.21.)
Note: The brake can only be used via switches under the
EL
armrest, the hand box, or angle switch.
Advertisement
Table of Contents
