Note: Setting the angle of backrest and seat should
always be done with your feet flat on the floor.
2.0.5. ADJUSTMENT OF SEAT TILT
Adjust the seat tilt by pulling up the middle lever placed at your
right hand.
2.0.6. ADJUSTMENT OF BACKREST ANGLE
Adjust the back tilt by pulling up the rear lever placed at your
right hand.
Only operate the handle when someone is sitting in the chair -
as the backrest tilts forward.
2.0.7. ADJUSTMENT OF BACK HEIGHT
Adjust by loosening the quick release handle on the backrest
and regulate the height. Remember to tighten the quick
release handle again.
2.0.8. BACK LATCH
The backrest can be set to a specific angle by adjusting and
secure the bolt which is mounted on the back of the chair
back.
*
Depending on model
1 1