Adjustment Of Armrest, Height; Adjustment Of Armrest, Width; Rotation (Manual); Foot Plate - Vela Tango 600S Instructions For Use Manual

VELA
TANGO
600S
1 2

2.0.9. ADJUSTMENT OF ARMREST, HEIGHT

Adjust by loosening the screw/lever on the armrest bar and
regulate the height of the armrest. Remember to tighten the
screw/lever again.

2.0.10. ADJUSTMENT OF ARMREST, WIDTH

Adjust by loosening the screw underneath the seat and
regulate the width of the armrest. Remember to tighten the
screw again.

2.0.11. ROTATION (MANUAL)*

The seat is rotated by pulling the rear handle on the left side.
Note: Cannot be combined with Footrests, section: 2.0.12.

2.0.12. FOOT PLATE*

The foot plate can be adjusted in length by loosening the hand
screw in the center of the rod on the footrest. Remember to
tighten the screw afterwards. The foot plate can be folded up
so that it does not interfere when getting in and out of the chair.
Warning: This footrest is not made to stand on -
if this is done, there is a risk of the chair tipping over.