Installation - AEG MSB2057D-B User Manual

Hide thumbs Also See for MSB2057D-B:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 71
extreme physical conditions in household
appliances, such as temperature,
vibration, humidity, or are intended to
signal information about the operational
status of the appliance. They are not
intended to be used in other applications
and are not suitable for household room
illumination.

3. INSTALLATION

WARNING!
Refer to Safety chapters.
3.1 Electrical installation
WARNING!
Only a qualified person must do the
electrical installation.
The manufacturer is not responsible if
you do not follow the safety precautions
from the chapter "Safety Information".
This microwave is supplied with a main cable
and main plug.
The cable has an earth wire with an earthing
plug. The plug must be plugged into an outlet
that is properly installed and earthed. In the
event of an electrical short circuit, earthing
reduces the risk of electric shock.
3.2 Installation - preliminary
preparation
To install the microwave in a cupboard with
dimensions as specified below, remove the 4
screws and the bracket from the bottom of
the appliance.
76
ENGLISH
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
600 mm
560+8 mm
18 mm
min.
300 mm
362 +3 mm
Follow the steps below, starting from number
1.
To install the microwave in a cupboard with
dimensions as specified below, no
modification is needed.
4x

Advertisement

Table of Contents
loading

Table of Contents