Table of Contents
Advertisement
Connector
POWER
Power connector with 9VDC/ 1.5 Ampere.
Reset Switch
The reset button, the router restore default settings when press until reboot.
The device connects to a router or DSL router.
WAN
LAN
For PC or NB to connect to the device.
PHONE/PHONE1 For analog phone to connect to the device.
For analog phone to connect to the device. (Check the device you bought, only specific
PHONE2
model has this port.)
For the PSTN line to connect to the device. (Check the device you bought, only specific
LINE
model has this port.)
2.4 Hardware installation
This section describes how to connect and configure the device.
Step 1.
Connect the DSL/Cable Modem or Broadband Router.
Connect the gateway directly to the LAN port of these devices.
Step 2.
Connect a Phone to the RJ-11 Phone Ports.
Use the analog phone connects to the Phone port.
Description
7
Advertisement
Table of Contents
