Interactive Voice Response (Ivr) Interface For The Gateway - Maxcom BRV111 User Manual

3.11.1 Interactive Voice Response (IVR) interface for the Gateway

User can use the PSTN phone to configure the device. Please follow the instruction to configure your terminal
adapter.
Group IVR Action
Function enable call waiting
Function disable call waiting
unlock keypad
Function
Function lock keypad
Function Reboot
Function Factory Reset
Info Check IP Address
Info Check IP Type
Check the Phone
Info
Number
Info Check Network Mask
Check Gateway IP
Info
Address
Check Primary DNS
Info
Server Setting
Info Check IP Address
Check Firmware
Info
Version
Setting Set DHCP client
Setting Set Static IP Address
IVR Menu Parameter(s)
Choice
None
#138#
None
#139#
None
#190#
None
#191#
None
#195#
#198# None
None
#120#
#121# None
#122# None
#123# None
#124# None
None
#125#
None
#126#
None
#128#
None
#111#
#112xxx*xxx*x Enter IP address
56
Notes
Enable Call waiting
Disable call waiting
You have to unlock keypad first, and
then you can change the setting by
keypad.
Lock keypad.
The system will reboot automatically.
System will automatically Reboot and
restore to default setting. WARNING:
ALL "User-Changeable"
NONDEFAULT SETTINGS WILL BE
LOST! This will include network and
service provider data.
IVR will report the LAN port IP address
IVR will report the WAN Port DHCP is
enabled or disabled.
IVR will report current in use VoIP
number
IVR will report the WAN Port network
mask
IVR will report the WAN Port gateway
IP address
IVR will report the WAN Port Primary
DNS server IP Address.
IVR will report the WAN port IP
address
IVR will report the firmware version
The system will change the WAN port
to DHCP Client type
WAN port DHCP Client will be