3.8.6 Dial Plan Settings
User can set the dial plan route to IP or FXO port directly. Default is disable.
This function is when you input the phone number by the keypad but you don't need to press "#". After time out
the system will dial directly.
Symbols explain:
x or X
+
Replace rule: If replace prefix code is ON and prefix number is matched with rule then 005 will replace prefix.
Auto Dial Time: Stop dialing after seconds then send dial number out.
Dial Plan: When match with pattern then send dial number out but if first digit is '0' then dial plan will be ignored.
Example:
*xx
#xx
10x
11x
0,1,2,3,4,5,6,7,8,9
or
If matched with one of *00,*01....*99 then will send number out
If matched with one of #00,#01....#99 then will send number out
If matched with one of 100,101....109 then will send number out
If matched with one of 110,111....119 then will send number out
38