Setup Wizard - Service Domain Settings - Maxcom BRV111 User Manual

3.3.3 Setup Wizard – Service Domain Settings
In this page, user can set up the SIP server settings. In Service Domain Function you need to input the account
and the related information in this page, please refer to your ISP provider. User can register three SIP accounts.
User can dial the VoIP phone to your friends via first enable SIP account and receive the phone from these three
SIP accounts. For the second phone you can use the same way to register.
-- First you need click Active to enable the Service Domain, then you can input the following items:
-- Display Name: you can input the name you want to display.
-- User Name: you need to input the User Name get from your ISP.
-- Register Name: you need to input the Register Name get from your ISP.
-- Register Password: you need to input the Register Password get from your ISP.
-- Domain Server: you need to input the Domain Server get from your ISP.
-- Proxy Server: you need to input the Proxy Server get from your ISP.
-- Outbound Proxy: you need to input the Outbound Proxy get from your ISP. If your ISP does not provide the
information, then you can skip this item.
-- User can see the Register Status in the Status item. If the item shows "Registered", then your Gateway is
registered to the ISP, you can make a phone call directly.
-- If you have more than one SIP account, you can follow the steps to register to the other ISP account.
14