Table of Contents
Advertisement
3.3 Sheet PadPuls M1
These sheet shows the actual settings and values of the PadPuls M1C. The following
input boxes and buttons are used to change the params of the pulse adapter:
Primary address
ID (sec. adr.)
Fabric. no.
Medium
PadPuls M1C User Manual
GmbH, Stettiner Str. 38, D-33106 Paderborn
is the M-Bus address of the device. Values between 1 and 250 can
be entered in this field for new assignment of the address. After
pressing the "Write" button the software programs this primary
address and further variable settings on this sheet into the M-Bus
device.
is the 8 digit M-Bus ID (identification no.), which is also used for
secondary addressing of this adapter.
is insignificant for PadPuls M1C.
describes the measured medium of the connected meter.
Examples: Oil, Water, Heat, Electricity
26.09.01, Version 1.3
9
Advertisement
Table of Contents
